Doughnut-shaped and Claw Insulators for Round Posts and Polyrope, Polywire, and Wire (including High Tensile Wire)
Three doughnut-shaped insulators (the post goes through the hole in the doughnut) have been designed specifically for polyrope and certain fiberglass posts, though these insulators can also carry polywire and wire. Product 07-98 attaches to 1/2-inch fiberglass posts, 07-99 attaches to 11/16-inch fiberglass posts, and 07-100 attaches to 7/8-inch fiberglass posts. Each insulator comes with a small screw that is screwed into the post to set the insulator at a particular location on the post.
Screws, Bolts, and Nuts/Washers for Use with Fiberglass Posts
These products are useful for attaching insulators 07-45 and 07-46 above to thick fiberglass posts. Once appropriate holes have been drilled, a bag of screws will serve to attach 25 insulators.
